This list of hardware parts focuses on Mouser part numbers, as the most commonly used online electronics store. You can of course get the manufacturer’s part number from there and buy elsewhere! Alternatives are included where possible in case there are stock or availability issues for the main parts.
Mainboard v0.7
Part | Qty | Description | Manufacturer Part No | Alternatives |
---|---|---|---|---|
Circuit Board | ||||
PCB | 1 | Mainboard v0.7 | DIY | |
Arduino | ||||
Uno | 1 | Will need Mainboard set to 5V version | A000066 | EBay |
Due | 1 | Will need Mainboard set to 3.3V version | A000062 | EBay |
Resistors | ||||
R1-R6 | 6 | 1 MOhm, 1%, 0.25W | 271-1.0M-RC Xicon | MF1/4DCT52A1004F KOA Speer, CMF551M0000FKR6 Vishay / Dale |
R7, R9, R11-R13 | 5 | 220 Ohm, 1%, 0.25W | 271-220-RC Xicon | MF1/4DCT52R2200F KOA Speer, CMF55220R00FHEK Vishay / Dale |
R8oC1 | 1 | 120 Ohm, 1%, 0.25W (or capacitor, see below) | 271-120-RC Xicon | MF1/4DCT52R1200F KOA Speer, CMF55120R00FKR6 Vishay / Dale |
R10 | 1 | 3.3 KOhm, 1%, 0.25W | 271-3.3K-RC Xicon | MF1/4DCT52R3301F KOA Speer, CMF553K3000FKBF Vishay / Dale |
Capacitors | ||||
R8oC1 | 1 | 10 uF (or resistor, see above. C1 best option if using Uno) | ECE-A1HKA100B Panasonic | UST1H100MDD1TE Nichicon |
Switches | ||||
S1-S2 | 2 | SPDT (See build details for purpose of these switches) | MS12AFG01 NKK | |
S1-S2 (Alt) | 2* | 1 x 3 header (Could just use wire if will never change) | 69190-403 Amphenol FCI, 929834-02-03-RK 3M, A2-3PA-2.54DSA(71) Hirose | See ALT_HEADER |
2 | 1 x 2 shorting jumper (Could just use wire if will never change) | 63429-202LF Amphenol FCI | 929951-00 3M, M7582-46 Harwin | |
Multiplexers | ||||
U1-U6 | 6 | SN74HC4851 (each 1 = 8 ports) | microDrum store | SN74HC4851N Texas Instruments |
Diodes | ||||
D1 | 1 | 1N4148 | 1N4148TR Vishay | 1N4148TR On / Fairchild |
ICs | ||||
U7 | 1 | 6N138 | 6N138 Vishay | 6N139M On / Fairchild |
U8 | 1 | 74LS04 (Midi thru only) | SN74LS04N (Texas Instruments) | |
Sockets | ||||
U1skt-U6skt | 6 | 16 pin DIP (2x8) | DILB16P-223TLF Amphenol FCI | 4816-3004-CP 3M |
U7skt | 1 | 8 pin DIP (2x4) | DILB8P-223TLF Amphenol FCI | 4808-3004-CP 3M |
U8skt | 1 | 14 pin DIP (2x7) (Midi thru only) | DILB14P-223TLF Amphenol FCI | 4814-3000-CP 3M |
Connectors | ||||
CONN1-CONN6 | 6 | 2 x 5 header | 67997-410HLF Amphenol FCI | XG8W-1041 Omron, M20-9760546 Harwin |
6 | 2 X 5 socket | 65239-005LF Amphenol FCI | XG4M-1030 Omron, M20-1070500 Harwin | |
JP1-JP3, JP5, JP6 | 5* | 1 x 3 header (JP3 - LCD) | 69190-403 Amphenol FCI, 929834-02-03-RK 3M, A23PA254DSA71 Hirose | See ALT_HEADER |
5 | 1 x 3 socket (JP3 – LCD) | 65240-003LF Amphenol FCI | 10-11-2034 Molex | |
JP4 | 1* | 1 x 6 header (LCD) | 68000-406HLF Amphenol FCI, M20-9770646 Harwin, 929834-02-06-RK 3M | See ALT_HEADER |
1 | 1 x 6 socket (LCD) | 65240-006LF Amphenol FCI | M20-1060600 Harwin, 10-11-2063 Molex | |
JX | 1* | 1 x 2 header (V5 version only - could replace with wire if not going to change) | 929800-01-02 3M, 68000-402 Amphenol FCI, M20-9730246 Harwin | See ALT_HEADER |
1 | 1 x 2 shorting jumper (V5 version only) | 63429-202LF Amphenol FCI | 929951-00 3M, M7582-46 Harwin | |
MIDI1-MIDI2 | 2 | 5 pin DIN socket | NYS325 REAN / Neutrik | T3359150 Amphenol FCI |
ARDUINO_CONN | 2* | 1 x 8 header | 929834-04-08-RK 3M, XG8V-0831 Omron, M20-9730846 Harwin | See ALT_HEADER |
2* | 1 x 6 header | 68000-406HLF Amphenol FCI, M20-9770646 Harwin, 929834-02-06-RK 3M | See ALT_HEADER | |
ALT_HEADER | 2 | 1 x 32 header - split (will cover all headers with qty marked with *) | 929834-02-36-RK 3M | |
Wire | Ribbon cable, rainbow version optional… | Ebay is best option as Mouser only does long lengths | ||
Contacts | To fit 22-30 AWG wire (assuming that matches ribbon wire above) | 76347-401LF Amphenol FCI | 08-50-0114 Molex - Need to make sure compatible with sockets chosen |
There are a number of optional parts in the above list, depending on the build configuration you require. The following table shows the options outlined on the Motherboard v0.7 board:
Part | V5 - Thru | V3.3 - Thru | V5 - No Thru | V3.3 - No Thru |
---|---|---|---|---|
S2 | Left | Right | Left | Right |
JX | Close | Open | Close | Open |
R11 | Yes | Yes | No | No |
R12 | Yes | Yes | No | No |
R13 | No | Yes | No | Yes |
U8 | Yes | Yes | No | Yes |
NB: S1 is used to determine if the Arduino resets automatically when it is connected to the computer via USB. If you do not wish it to reset every time you connect it set this to closed.
Jack Board v0.4
Part | Qty | Description | Manufacturer Part No |
---|---|---|---|
Circuit Board | |||
PCB | 1 | Jack Board v0.4 | DIY |
Jacks | |||
U1-U4 | 4 | Mono sockets for single piezo trigger, stereo for two | Stereo: NMJ6HFD2, NRJ6HF-1 or Mono: NMJ4HHD2 Neutrik |
Resistors | |||
R1-R4 | 4 | 1 MOhm or 100 Ohm with HHC Resistor; 1%, 0.25W | Xicon 271 range |
Switches | |||
S1-S4 | 1 | 1 x 12 header | 929834-02-12-RK 3M |
Jumper | 4 | 1 x 2 shorting jumper (Could just use wire if will never change) | 63429-202LF Amphenol FCI, 929951-00 3M or M7582-46 Harwin |
Connectors | |||
Conn1 | 1 | 2 x 5 header | 67997-410HLF Amphenol FCI, XG8W-1041 Omron or M20-9760546 Harwin |
1 | 2 x 5 socket | 65239-005LF Amphenol FCI, XG4M-1030 Omron or M20-1070500 Harwin | |
Contacts | To fit 22-30 AWG wire (assuming that matches ribbon wire above) | 76347-401LF Amphenol FCI or 08-50-0114 Molex - Need to make sure compatible with sockets chosen | |
Wire | Ribbon cable, rainbow version optional… | Ebay is best option as Mouser only does long lengths |
NB: These quantities are for a single board, giving you 4 sockets.
LCD v0.1
There is currently no PCB available for this module, use stripboard or perfboard to build this.
Part | Qty | Description | Mouser Part No | Alternatives |
---|---|---|---|---|
Circuit Board | ||||
PCB | 1 | Stripboard | ST2 BPS | |
Resistors | ||||
R1 | 10 KOhm variable resistor | T93XA103KT20 Vishay | ||
R2-R4 | 3 | 10 KOhm, 1%, 0.25W | 271-10K-RC Xicon | MF1/4DCT52R1002F KOA Speer, CMF5510K000FKEK Vishay |
Switches | ||||
S1-S3 | 3 | SPST, Momentary | 1301.9302 Schurter | |
Screen | ||||
1 | 16 x 2 screen | NMTC-S16205DRGHS Microtips Technology | EBay is a good source, with a wide range of colours available | |
Connectors | ||||
JP3 | 1* | 1 x 3 header | 69190-403 Amphenol FCI, 929834-02-03-RK 3M, A2-3PA-2.54DSA(71) Hirose | See ALT_HEADER |
1 | 1 x 3 socket | 65240-003LF Amphenol FCI | 10-11-2034 Molex | |
JP4 | 1* | 1 x 6 header | 68000-406HLF Amphenol FCI, M20-9770646 Harwin, 929834-02-06-RK 3M | See ALT_HEADER |
1 | 1 x 6 socket | 65240-006LF Amphenol FCI | M20-1060600 Harwin, 10-11-2063 Molex | |
ALT_HEADER | 1 | 1 x 32 header - split (will cover all headers with qty marked with *) | 929834-02-36-RK 3M | |
Contacts | To fit 22-30 AWG wire | 76347-401LF Amphenol FCI | 08-50-0114 Molex - Need to make sure compatible with sockets chosen |